|
| |
Trim Saws do the fine cutting of slabs to rough out a cabochon form,
trim up a piece of faceting rough, or any other piece of work you want to "trim"
to size. Graves Company carries the most complete line of trim saws in the industry. From
our high speed 4 inch saws, more general purpose 6 inch saws, or full size 8 inch saws, we
have the saw for you.
 |
Our own 4 inch Faceter's Saw. Especially
made for the ultra-thin blades. Built for the faceter who needs to trim small pieces
of facet rough. Completely self contained with removable sump for easy cleaning. Variable
speed motor with foot control allows you to start the cut a low speed then increase the
speed allowing for a safe and efficient cutting operation. Maximum of 5,000 RPM will
accept any 4 inch blade from .004" to .025" thick with a 1/2" arbor.
Compact size of only 11" x 7" x 5" high.
 Click Here for Blades!
|
 |
4" LITTLE TRIMMER FACET SAW.
Well Built Quality. A 1/15
HP continuous duty motor turns the 4"x1/2" arbor Euroblade at 3000 RPM. The
sump, base and table are made from heavy cast aluminum to provide a sturdy, rust free
system. Maximum cutting depth 11/2 inches. 4"x.007 Eurocutter diamond blade included.
110 Volt only. |
 |
4/5 INCH TRIM SAW.
Large 9” x 6-1/4 table makes this saw very
easy to work with. The blade cover can be raised if necessary to
accommodate large pieces, and the front splash guard is removable.
Convenient storage tray molded into the durable housing. 1/4 HP
variable speed direct drive motor is fast enough to use the ultra thin
diamond blades and powerful enough for sintered diamond blades.
The variable speed allows you to ease the stone to start
your cut then crank it up to finish. Top removes
making clean-up quick and easy. Supplied with
5” x .012 x 5/8” diamond blade. Can also be used with a 4” blade. Made in
USA. |
 |
6" TRIM SAW.
Our new compact trim saw features a 8-1/2 x 9-
3/4 Stainless Steel work surface,
sealed ball bearing arbor, arbor pulley, belt and
blade guard. Requires 6” blade with 1/2” arbor
hole. Uses approximately 1 quart of coolant.
Motor (1/4 hp or larger), motor pulley and blade
not included. Must be bolted to work surface.
SUMMER SPECIAL!
|
|
|
6" Trim Saw Item No. 13-090 |
$123.50
REG. $145.00 |
| |
6" TRIM SAW WITH MOTOR.
Our 6 inch trim saw above supplied
with a 1/4 HP motor, power cord with switch, mounted to a sturdy
3/4" plywood base.
This saw is our new 6 inch trim saw described above all
ready to go out of the box! A diamond blade (6" x 0.012" x 1/2" arbor) is included.
Measures 21" long x
11" wide x
12" high.
SUMMER SPECIAL!
|
|
|
Item No. 13-091 |
$299.00
REG. 319.00 |
|
|
Export Version
220 volt 50hz |
$429.00 |
 |
8 INCH STAINLESS STEEL TRIM SAW.
For hobbyists and serious rock
hounds. The stainless steel TS8-C includes an 8”
diamond blade with 5/8” arbor hole, vise, plastic
hood and motor with on/off switch. The worktable
has a 101/2” x 15” work surface. Also
includes sealed ball bearing arbor, arbor
pulley, 3/4” stainless steel shaft, belt and blade
guard. Requires 2 quarts of cutting oil.
SUMMER SPECIAL!
|
|
|
Model TS8C |
Item No.
13-114 |
$589.00 REG. 685.00 |
|
|
Model TS8
less motor, blade, vise, hood |
Item No.
13-121 |
$285.00 |
 |
10 INCH TRIM/SLAB SAW.
Stainless steel construction.
The perfect choice if you hate rust!
Includes 10" diamond blade*, 1/3 hp motor,
plastic hood, vise and base. The worktable has a
14-1/4" x 16-5/8" work surface and centered blade.
Use our premium odorless KoolKut saw oil for best
results. FALL SPECIAL!
|
|
|
10 in. Trim
Saw Complete |
$659.00 REG. $750.00 |
 |
ROCK VISE.Excellent for securely holding rough or
gemstones, permitting cutting and slicing very thin sections or precision
cutting of precious material. Every cut is perfectly straight and blade
damage is virtually eliminated. Measures 4" x 3" and has a two inch opening
span. The jaw blocks are made from hardwood allowing a secure grip to the
material without any damage. The cross feed is simple to adjust with precise
alignment. Fits the 6" Trim Saw, Cab-Mate or Cab6. |
|
