colologo.gif (3865 bytes)

                              Quality Lapidary Equipment and Supplies Since 1946!

 

 

 

 

Graves’ TopCutter Faceting Plates - A Low Cost Alternative. Used extensively by professional cutters overseas, Graves can now make available these metal bonded diamond faceting plates to our customers. Basically, these plates are the standard diamond faceting lap without the aluminum backing disc. Now those of you who want to recondition your old laps can do so. Use them to replace your old worn out lap or buy a complete set and use them with one master lap. These faceting plates are especially popular in the coarser grit sizes for preforming FAST. TopCutters can also be used on cabbing units using flat discs. Available in 6 and 8 inch sizes with 1/2" arbor hole.

6 inch TopCutter Lap Plates

80 grit Item No. 16-571 $65.00

100 grit Item No. 16-572 $55.00

180 grit Item No. 16-573 $55.00

260 grit Item No. 16-574 $40.00

360 grit Item No. 16-575 $40.00

600 grit Item No. 16-576 $37.00

1200 grit Item No. 16-577 $33.00

 

8 inch TopCutter Lap Plates

80 grit Item No. 16-581 $85.00

100 grit Item No. 16-582 $75.00

180 grit Item No. 16-583 $65.00

260 grit Item No. 16-584 $50.00

360 grit Item No. 16-585 $50.00

600 grit Item No. 16-586 $46.00

1200 grit Item No. 16-587 $46.00

 

LAP CASE. Eliminate problems with storage space, contamination, and surface damage. These plastic cases give total protection and will stack securely. There is even an area on the edge to label the contents! Can be used for both 6 inch and 8 inch laps

Item No. 16-999

$6.95 ea.

 6 or more $5.00 each

 

 
Send mail to tech@gravescompany.com with questions or comments about this web site.
Copyright © 1998, 2006 Graves Company   1800 North Andrews Avenue   Pompano Beach   FL   33069   USA
Toll Free Ordering Only (800) 327-9103   International (954) 327-9103   FAX (954) 960-0301
Last modified: October 05, 2008