|
| |
Faceting Laps
 |
STANDARD LAPS. Electrobonded
Diamond Laps. The most popular lap for all faceters, used the worldwide.
These flat laps are prepared with precisely graded diamonds, metal bonded with nickel on
an aluminum base plate. 1/2" arbor hole. |
| 6 inch Standard Laps |
|
|
100 grit |
Item No. 16-011 |
$87.00 |
|
|
180 grit |
Item No. 16-014 |
81.00 |
|
|
260 grit |
Item No. 16-019 |
72.00 |
|
|
360 grit |
Item No. 16-035 |
72.00 |
|
|
600 grit |
Item No. 16-024 |
63.00 |
|
|
1200 grit |
Item No. 16-028 |
87.00 |
|
|
3000 grit |
Item No. 16-031 |
99.00 |
|
|
8000 grit |
Item No. 16-033 |
99.00 |
| 8
inch Standard Laps |
|
|
100 grit |
Item No. 16-050 |
$135.00 |
|
|
180 grit |
Item No. 16-052 |
109.00 |
|
|
260 grit |
Item No. 16-056 |
95.00 |
|
|
360 grit |
Item No. 16-070 |
90.00 |
|
|
600 grit |
Item No. 16-060 |
84.00 |
|
|
1200 grit |
Item No. 16-063 |
103.00 |
|
|
3000 grit |
Item No. 16-066 |
134.00 |
|
|
8000 grit |
Item No. 16-068 |
134.00 |
GROOVED LAPS. For
Faster, Cleaner Cutting. A premium metal bonded diamond lap with island type
plateaus separated by channel depressions. The channels permit the rapid removal of
cutting debris providing a faster yet slightly coarser cut than is achieved with a
standard disc. 1/2" arbor holes.
| 6 inch Grooved Laps |
|
|
100 grit |
Item No. 16-036 |
$127.00 |
|
|
180 grit |
Item No. 16-015 |
101.00 |
|
|
260 grit |
Item No. 16-020 |
89.00 |
|
|
360 grit |
Item No. 16-022 |
85.00 |
|
|
600 grit |
Item No. 16-025 |
76.00 |
|
|
1200 grit |
Item No. 16-029 |
85.00 |
| 8 inch Grooved Laps |
|
|
100 grit |
Item No. 16-071 |
$193.00 |
|
|
180 grit |
Item No. 16-053 |
128.00 |
|
|
260 grit |
Item No. 16-057 |
110.00 |
|
|
360 grit |
Item No. 16-059 |
103.00 |
|
|
600 grit |
Item No. 16-061 |
97.00 |
|
|
1200 grit |
Item No. 16-064 |
103.00 |
SOLID STEEL LAPS. Diamond
Plated Laps. Made for the faceter who requires an absolutely flat and parallel
surface. These discs also have a corrosion resistant undercoating.1/2" arbor hole.
| 6 inch Solid Steel Laps |
|
|
100 grit |
Item No. 16-012 |
$134.00 |
|
|
180 grit |
Item No. 16-016 |
127.00 |
|
|
260 grit |
Item No. 16-021 |
109.00 |
|
|
600 grit |
Item No. 16-026 |
83.00 |
|
|
1200 grit |
Item No. 16-030 |
99.00 |
|
|
3000 grit |
Item No. 16-032 |
118.00 |
| 8 inch Solid Steel Laps |
|
|
100 grit |
Item No. 16-051 |
$196.00 |
|
|
180 grit |
Item No. 16-054 |
132.00 |
|
|
260 grit |
Item No. 16-058 |
115.00 |
|
|
600 grit |
Item No. 16-062 |
100.00 |
|
|
1200 grit |
Item No. 16-065 |
104.00 |
|
|
3000 grit |
Item No. 16-067 |
131.00 |
RIPPLE DISC. Fast Cutting, Aggressive Laps. Top of the line for extremely fast
cutting. Tops of the ripples wear exposing fresh diamond making the 100 grit disc cut like
a 40 grit and the 180 grit disc cut like a 60 grit, yet it remains sharper for a longer
period. 1/2" arbor hole.
|
|
6 inch 100 grit |
Item No. 16-0179 |
$137.00 |
|
|
6 inch 180 grit |
Item No. 16-017 |
101.00 |
|
|
8 inch 100 grit |
Item No. 16-0559 |
194.00 |
|
|
8 inch 180 grit |
Item No. 16-055 |
128.00 |
MASTER LAP. A base lap used as a support. This
uncharged aluminum lap is used as a base for other laps such as Ultralaps
and Topcutters Precisely ground falt and parallel with 1/2" arbor hole.
|
|
6 inch Master Lap |
Item No. 16-210 |
SALE!
$15.40 |
|
|
8 inch Master Lap |
Item No. 16-238 |
SALE!
$18.20 |
|
 |
LAP CASE. Eliminate problems with storage space,
contamination, and surface damage. These plastic cases give total protection
and will stack securely. There is even an area on the edge to label the
contents! Can be used for both 6 inch and 8 inch laps |
|
|
Item No. 16-999 |
$6.95 ea. |
6 or more
$5.00 each |
 |
LAP HOLDER. Store And Protect Your Laps.
Eliminates problems with storage space, contamination and surface damage. This handy
lap holder will store any combination of 7 laps, discs, blades or wheels in 6 or 8 inch
diameters. The slots will accommodate two 1/4" and five 1/2" thick discs. The
water tight, compact 6" x 8" x 4 1/2" high, with 1/2" plexiglass
construction holds the discs by their edges and prevents them from touching each other.
Since the discs are held in the upright position, water will run-off to minimize potential
rusting. |
|
