|
| |
Diamond Band Saw
 |
Graves DL 3000XL Diamond Band Saw.
Mosaics, Intarsia, Freeforms, Carving, Sculptures. These lapidary
techniques are now within the capabilities of everyone with the DL 3000XL band saw. The most
difficult task of any saw is to cut a curve in stone. Several machines have attempted to
fill this need but all have fallen short in some respect. The DL 3000XL is a heavy duty, no
nonsense piece of equipment. Our exclusive stainless steel, seamless diamond blade makes
short work of the hard gem materials such as agate and jade. Cuts a minimum radius of only
3/16 inch! Do away with diamond wire and nippers. No longer are curves and freeform
designs a challenge. The possibilities are only ;limited by your imagination!. Includes
blade. |
|
DL3000 Specifications |
| Maximum Horsepower |
1/7 hp |
Overall Width |
14 inches |
| Blade Shaft RPM |
2800 maximum |
Length |
10 inches |
| Blade Length |
36 inches |
Weight |
23 lbs. |
| Blade Thickness |
.012 inches |
Table Size |
10 in. x 12 in. |
| Blade Depth |
1/8 inch |
Max. Height for Blade
Guide |
1.5 in. |
| Throat Depth |
5 inches |
Minimum Cutting Radius |
3/16 in. |
| Overall Height |
18 inches |
Cutting Speed (1/8"
quartz) |
26 in. per minute |
| |
|
|
|
|
|
Item No. 13-182 |
$499.00 |
|
|
Item No.
13-1821 |
$529.00 |
Replacement Blade
|
|
INLAND
DIAMOND BAND SAW. The easiest to use, most versatile Diamond Band
Saw ever made. The Inland DB-100 Diamond Band Saw is the perfect saw for
intarsia, free form, and even cabbing preforms. Saws hundreds of minerals,
from Acanthite to Zircon. Increase your yields on valuable rough and save
your cutting laps by cutting accurate preforms anywhere, even right out of
the middle of a piece! Improve your faceting results by cutting along the
veils for cleaner finished gems. |
Key Features
 | Comes with one diamond blade for sawing agates, opals, glass, stone, and
most other hard materials. |
| The optional WoodCut™ and MetalCut™ blades saw wood, plastics, fiberglass,
leather, non-ferrous metals, printed circuit boards and more. |
| Replaceable BladeSert™ blade guides make the most intricate cuts simple.
The upper blade/drip guide is adjustable for varying material thickness. |
| The coolant system provides a continuous, regulated flow of clean coolant
to the diamond blade when wet sawing. Uses water for coolant to avoid messy
oil clean-up. |
| The spring-loaded tension system, molded into the frame, insures proper
wheel alignment, simple blade setup, and perfect tracking hour after hour, and
enhances blade life. |
| The work surface is 9" x 10" and corrosion resistant. |
| The frame, cover, and water reservoir are molded entirely from structural
grade thermoplastic. |
| All frame and interior support walls are extra thick for maximum strength
and durability. |
| The rigid housing absorbs and deadens sawing and motor sounds for quiet
operation. The plastic construction makes it extremely light weight and easy
to handle, so you can take it with you on the road! |
|
|
Inland
Diamond Band Saw |
Item 13-180 |
$249.00 |
|
|
Replacement
Diamond Blade |
Item
18-0093 |
$69.00 |
|
|
Wood Blade |
Item
18-0095 |
$21.95 |
|
|
Metal Blade |
Item
18-0097 |
$21.95 |
|
|
BladeSert
Blade Guide |
Item
18-0099 |
$3.50 |
|
