Graves TopCutter™ Diamond Plates

Graves TopCutter™ Diamond Plates

A Low Cost Alternative. Used extensively by professional cutters overseas, Graves can now make available these metal bonded diamond faceting plates to our customers. Basically, these plates are the standard diamond faceting lap without the aluminum backing disc. Now those of you who want to recondition your old laps can do so. Use them to replace your old worn out lap or buy a complete set and use them with one master lap. These faceting plates are especially popular in the coarser grit sizes for preforming FAST. TopCutters can also be used on cabbing units using flat discs. Available in 6 and 8 inch sizes with 1/2" arbor hole.
topcutter.jpg
Topcutter, 6 in. 80 mesh
SKU: 16-571
Price: $49.00
Topcutter, 6 in. 100 mesh
SKU: 16-572
Price: $49.00
Topcutter, 6 in. 180 mesh
SKU: 16-573
Price: $39.00
Topcutter, 6 in. 260 mesh
SKU: 16-574
Price: $39.00
Topcutter, 6 in. 360 mesh
SKU: 16-575
Price: $39.00
Topcutter, 6 in. 600 mesh
SKU: 16-576
Price: $37.00
Topcutter, 6 in. 1200 mesh
SKU: 16-577
Price: $33.00
Topcutter, 6 in. 3000 mesh
SKU: 16-578
Price: $49.00
topcutter.jpg
Topcutter, 8 in. 80 mesh
SKU: 16-581
Price: $75.00
Topcutter, 8 in. 100 mesh
SKU: 16-582
Price: $75.00
Topcutter, 8 in. 180 mesh
SKU: 16-583
Price: $59.00
Topcutter, 8 in. 260 mesh
SKU: 16-584
Price: $50.00
Topcutter, 8 in. 360 mesh
SKU: 16-585
Price: $50.00
Topcutter, 8 in. 600 mesh
SKU: 16-586
Price: $46.00
Topcutter, 8 in. 1200 mesh
SKU: 16-587
Price: $46.00
Topcutter, 8 in. 3000 mesh
SKU: 16-588
Price: $75.00
Master.jpg
Master Lap
A base lap used as a support. This uncharged aluminum lap is used as a base for other laps such as Ultralaps and Topcutters. Precisely ground flat and parallel with 1/2" arbor hole.
16-998.jpg
Lap Case
Eliminate problems with storage space, contamination, and surface damage. These plastic cases give total protection and will stack securely. There is even an area on the edge to label the contents! Can be used for both 6 inch and 8 inch laps